 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TECHNICAL DATA IW4049B Hex Buffer/Converter High-Voltage Silicon-Gate CMOS The IW4049B is inverting hex buffers and feature logic-level conversion using only one supply (voltage (VCC). The input-signal high level (VIH) can exceed the VCC supply voltage when these devices are used for logic-level conversions. These devices are intended for use as CMOS to DTL/TTL converters. * Operating Voltage Range: 3.0 to 18 V * Maximum input current of 1 A at 18 V over full package-temperature range; 100 nA at 18 V and 25C * Noise margin (over full package temperature range): 0.5 V min @ 5.0 V supply 1.0 V min @ 10.0 V supply 1.0 V min @ 15.0 V supply * High-to-low level conversion ORDERING INFORMATION IW4049BN Plastic IW4049BD SOIC TA = -55 to 125 C for all packages LOGIC DIAGRAM PIN ASSIGNMENT NC = NO CONNECTION FUNCTION TABLE Inputs A H PINS 13, 16 = NO CONNECTION PIN 1 =VCC PIN 8 = GND L Output Y L H Rev. 00 IW4049B MAXIMUM RATINGS* Symbol VCC VIN VOUT IIN PD PD Tstg TL * Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Power Dissipation per Output Transistor Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +20 VCC** to +18 -0.5 to VCC +0.5 10 750 500 100 -65 to +150 260 Unit V V V mA mW mW C C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/C from 65 to 125C SOIC Package: : - 7 mW/C from 65 to 125C ** The IW4049B has high-to-low level voltage conversion capability but not low-to-high level; therefore it is recommended that VIN VCC RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN VOUT TA ** Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) Operating Temperature, All Package Types Min 3.0 VCC** 0 -55 Max 18 18 VCC +125 Unit V V V C The IW4049B has high-to-low level voltage conversion capability but not low-to-high level; therefore it is recommended that VIN VCC This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND(VIN or VOUT)VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. Rev. 00 IW4049B DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND) VCC Symbol VIH Parameter Minimum High-Level Input Voltage Maximum Low Level Input Voltage Minimum High-Level Output Voltage Maximum Low-Level Output Voltage Maximum Input Leakage Current Maximum Quiescent Supply Current (per Package) Minimum Output Low (Sink) Current Test Conditions VOUT= 0.5V VOUT= 1.0 V VOUT= 1.5V VOUT= VCC - 0.5V VOUT= VCC - 1.0 V VOUT= VCC - 1.5V VIN=GND V 5.0 10 15 5.0 10 15 5.0 10 15 5.0 10 15 18 5.0 10 15 20 4.5 5 10 15 5.0 5.0 10 15 Guaranteed Limit -55C 4 8 12.5 1 2 2.5 4.95 9.95 14.95 0.05 0.05 0.05 0.1 1 2 4 20 3.3 4 10 26 -2.6 -0.81 -2.0 -5.2 25C 4 8 12.5 1 2 2.5 4.95 9.95 14.95 0.05 0.05 0.05 0.1 1 2 4 20 2.6 3.2 8 24 -2.1 -0.65 -1.65 -4.3 125 C 4 8 12.5 1 2 2.5 4.95 9.95 14.95 0.05 0.05 0.05 1.0 30 60 120 600 1.8 2.4 5.6 18 mA -1.55 -0.48 -1.18 -3.1 Unit V VIL V VOH V VOL VIN= VCC V IIN ICC VIN= GND or VCC VIN= GND or VCC A A IOL VIN= GND or VCC UOL=0.4 V UOL=0.4 V UOL=0.5 V UOL=1.5 V mA IOH Minimum Output VIN= GND or VCC High (Source) Current UOH=2.5 V UOH=4.6 V UOH=9.5 V UOH=13.5 V Rev. 00 IW4049B AC ELECTRICAL CHARACTERISTICS (CL=50pF, RL=200k, Input tr=tf=20 ns) VIN Symbol tPLH Parameter Maximum Propagation Delay, Input A to Output Y (Figure 1) V 5 10 10 15 15 5 10 10 15 15 5 10 15 5 10 15 VCC V 5 10 5 15 5 5 10 5 15 5 5 10 15 5 10 15 Guaranteed Limit -55C 120 65 90 50 90 65 40 30 30 20 160 80 60 60 40 30 25C 120 65 90 50 90 65 40 30 30 20 160 80 60 60 40 30 22.5 125C 240 130 180 100 180 130 80 60 60 40 320 160 120 120 80 60 Unit ns tPHL Maximum Propagation Delay, Input A to Output Y (Figure 1) ns tTLH Maximum Output Transition Time, Any Output (Figure 1) Maximum Output Transition Time, Any Output (Figure 1) Maximum Input Capacitance ns tTHL ns CIN pF Figure 1. Switching Waveforms EXPANDED LOGIC DIAGRAM (1/6 of the Device) Rev. 00 IW4049B N SUFFIX PLASTIC (MS - 001BB) A 16 9 B 1 8 Dimensions, mm Symbol A B MIN 18.67 6.10 0.36 1.14 2.54 7.62 0 2.92 7.62 0.20 0.38 10 3.81 8.26 0.36 MAX 19.69 7.11 5.33 0.56 1.78 F L C D F C -T- SEATING PLANE N G D 0.25 (0.010) M T K M H J G H J K L M N NOTES: 1. imensions "A", "B" do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D SUFFIX SOIC (MS - 012AC) A 16 9 Dimensions, mm Symbol. MIN 9.80 3.80 1.35 0.33 0.40 1.27 5.72 0 0.10 0.19 5.80 0.25 8 0.25 0.25 6.20 0.50 MAX 10.0 4.00 1.75 0.51 1.27 B P H A B C C R x 45 1 G 8 D F G -TD 0.25 (0.010) M T C M K SEATING PLANE J F M H J K M P R NOTES: 1.Dimensions A and B do not include mold flash or protrusion. 2.Maximum mold flash or protrusion 0.15 mm (0.006) per side for A, for B - 0.25 mm (0.010) per side. Rev. 00 |
Price & Availability of IW4049B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |